|
|
|
|
TRIMITETI UN MESAJ
|
|
|
|
|
PORTOFOLIU si CLIENTI
|
Ultimele proiecte:
|
|
» detalii
|
|
|
|
Aliat Corporation SRL
Sos. Nicolae Titulescu Nr. 64, Bl. 24, Sc. A, et. 1, ap. 3, Sector 1, Bucuresti.
Tel : +40 371.019.775
Fax : +40 372.707.815
Mobil: +40 729.164.273
Email: contact@aliatcorporation.com
|
|
|
|
|
|
|
SERVICII
|
Video Security Systems
NVR STAND-ALONE 8 CH
Model DS 7308HI-S
NETWORK DVR, 8 Ch IN/OUT Video,
4 Ch IN Audio, 1 Ch Audio OUT,
16 IN/4 OUT Ch Alarma,
Redare Sincrona: 8 Ch
Detectie Miscare,
Back-up prin USB, CD/DVD, Retea
MINI SPEED DOME EXTERIOR, DAY/NIGHT. COLOR, 1/4" SONY CCD
High magnification zoom lens
- Max 100 times zoom (optical x10 zoom, digital x10 zoom)
- Horizontal resolution min. 520 TVL
- Color: min. 520 TVL, B/W: min. 570 TVL horizontal resolution
Low light and Day & Night
- The result of improving sensitivity 0.0007 Lux (DSS Control)
- ICR Day & Night allows the filter to change B/W mode (0.1 Lux) in the night
Additional functions
- PTZ trace: Memorize PTZ move for 120 seconds then operate the registered trace
- Auto swing: Repeat pan and tilt between two preset positions
- Group: 12 Preset positions are chained in one Group. (Max 12 Groups available)
- Tour: Max 12 Groups are bound
- 410k Pixel CCD CAMERA
- SONY CCD chip with high resolution and low illumination condition
- 250 Preset positions
- A maximum of 250 preset positions can be programmed. The preset function enables to set where you want on monitor at any time.
- 4 ch. alarm inputs
- It can be directly connected to sensor and used with presets owing to built-in 4-channel sensor input terminals. It can be also operated together with other equipment owing to built-in alarm output.
- Auto Tilt move
- The unit can track the object moving automatically until 180° in vertical
- OSD (On Screen Display)
- Provides character information displayed on the monitor, such as the camera ID address, camera name, preset number, sequence status, and sets various functions of camera easily on the OSD menu screen
- Privacy Zones
- For the privacy, it can be programmed for masking zone up to 4 locations on the OSD menu screen.
- Audio out (Option)
- Built-in mono microphone without Amplifier
CONTROLLER SPEED DOME, 3 AXE - MDK 255
This controller is used to operate pan / tilt / zoom dome cameras and speed dome cameras.
This is able to control the maximum of 255 cameras and lot of sub-keyboards.
It is also controlled CCTV Receivers, Matrix Systems, Alarm Receiver and other controlled
Equipments:
- Dome Camera can set and fulfill the surveillance function as preset, swing, group(it means tour), tour(it means auto-tour) and etc with the keyboard controller.
- Control up to maximum 255 cameras
- Several keyboard can be used to simultaneous control of a camera
- Easy operation of pan/tilt/zoom with a joystick
- Same effect as 64 fixed surveillance cameras by setting the maximum 64 preset positions
- Pan/Tilt swing function (it means auto pan surveillance)
- Group function (it means tour surveillance)
- Tour function (it means auto-tour surveillance)
- PTZ trace function (it means pattern surveillance)
- OSD (On Screen Display) function
- Spiral surveillance function
- Easy setup mode by LCD (Liquid Crystal Diode) module
|
|
|
|
|